Fresh milk, cold ice cream, and tasty leftovers are all things we tend to take advantage. However, sometimes our fridges can go awry, and the main culprit tends to be the thermostat. This can lead to a significant temperature drop in the icebox of the freezer, which can solidify your stored goods in it. While this may not harm some of your canned foods, it is not ideal for vegetables and dairy products.
So, in this article, we’re going to look at how to fix this common problem and keep your house running smoothly. Just use the following DIY ways to adjust a broken thermostat in your home refrigerator:
1. First, check the thermostat.
The problem is that many people are not checking the settings of the thermostat. It might be something else and not a broken thermostat. You may have accidentally lowered the temperature of the machine. If you have kids at home, you might have messed around with the dial of the device.
First, set the temperature and let it run overnight. The temperature should be right the next morning. If this does not resolve the problem, continue to the next step.
2. Pull the refrigerator out of the socket.
Check the panel in which the thermostat is located. You should first remove the stored goods in your icebox. You can ask your neighbour to save some of your perishable products in the meantime. In this sense, you can fix the problem without any obstacles.
3. Find out if the control cover is attached with screws or scissors
If it is fastened with screws, you will want to use a screwdriver to remove the cover. If it is connected with scissors, just make sense as you can unclip the lid. In some versions of refrigerators, the dial must first be removed to allow you to remove the cover. Check your manual to find out.
4. Turn the thermostat dial to the coldest temperature setting.
Check the wiring of the device and remove two of the cables. No need to worry here, you know how to reset them.
5. Adjust the settings of the gadget for the time being.
It is advisable to test the terminals. Have the tests of the millimetre connected to a port on the control panel of the thermostat. Adjust the settings to the point where you can get a zero shot. If this is not possible, the gadget itself must be repaired. One way to get around this is a smart home thermostat. A smart thermostat allows you to regulate the temperature of all your household items, including the fridge.
After the thermostat has been repaired, install it on the radiator. Check the reading. If it’s zero, it should work. Reconnect the two cables that you disconnected and replace the cover.
Well, there you have it. A broken fridge is no fun, but if you follow these simple steps, you should be able to figure out the problem and fix it in no time.